Industry leading support surfaces from SPH Medical
CategoriesHospital Mattresses,  Pressure Ulcer Prevention

The Role of SPH Medical’s Support Surfaces in Pressure Ulcer Prevention

Pressure ulcers, commonly known as bedsores, are a significant concern in healthcare settings, particularly among patients with limited mobility. These injuries not only impact a patient’s quality of life but also increase healthcare costs due to prolonged treatment and extended hospital stays. SPH Medical offers innovative support surfaces designed to mitigate these risks and prioritize patient care and help increase pressure ulcer prevention.

Pressure ulcers are a critical challenge in modern healthcare, affecting approximately 2.5 million patients annually in the United States alone, leading to significant morbidity and mortality. The implementation of advanced medical technology, such as SPH Medical’s support surfaces, plays a pivotal role in reducing the prevalence of these conditions. By adopting such solutions, healthcare providers demonstrate their commitment to delivering optimal, evidence-based care.

Pressure ulcers, often referred to as never events, are serious injuries that are entirely preventable with the right care and protocols. These ulcers, caused by unrelieved pressure on the skin, can lead to severe complications, including infections, prolonged hospital stays, and increased mortality rates. For patients in hospitals and nursing homes, the risk is particularly heightened due to factors like limited mobility, advanced age, and underlying health conditions. The occurrence of pressure ulcers not only jeopardizes patient safety but also reflects a significant gap in care standards. By prioritizing proactive measures, such as frequent repositioning, utilizing pressure-relieving devices, and ensuring adequate staff training, facilities can significantly reduce the incidence of pressure ulcers, upholding higher safety and quality care standards.

The Science Behind Pressure Ulcers and Pressure Ulcer Prevention

Pressure ulcers develop due to prolonged pressure on the skin, restricting blood flow and causing tissue damage. Patients at high risk, such as those with immobility, chronic illnesses, or poor nutritional status, require vigilant care to prevent these injuries. Studies have shown that the use of advanced support surfaces can significantly reduce the incidence of pressure ulcers by redistributing pressure effectively and enhancing patient comfort.

Importance of High-Quality Support Surfaces

The right support surfaces are critical in preventing pressure ulcers, as they target multiple risk factors such as pressure, shear, and moisture. SPH Medical’s mattresses are designed for mobility support, optimal immersion, and superior airflow, addressing these key contributors to skin breakdown. According to clinical guidelines published by the National Pressure Injury Advisory Panel (NPIAP), high-quality therapeutic surfaces dramatically reduce the risk of pressure-related injuries.

SPH Medical Products and Technology Innovation

SPH Medical’s support surfaces incorporate cutting-edge technology to deliver excellent pressure redistribution while ensuring patient and caregiver safety. Key features include:

  • Advanced Pressure Redistribution – Designed to minimize localized pressure points by evenly distributing a patient’s weight.
  • Shear-Reducing Technology – Mechanisms that limit friction and shear forces, essential in injury prevention.
  • Moisture Management – Specialized materials allow airflow to reduce moisture accumulation, helping to maintain skin integrity.
  • Ease of Use for Caregivers – Intuitive designs enable caregivers to adjust settings effortlessly, improving efficiency in care delivery.

SPH Medical Mattresses by SPAN America allow vapor diffusion

Top 3 Support Surfaces from SPH Medical

SPH Medical offers a range of advanced support surfaces designed to prevent pressure ulcers and enhance patient care. One standout product is the PressureGuard® APM2 Deluxe, which offers alternating pressure, float mode and lateral rotation therapy. The alternating pressure feature promotes healthy circulation and effectively offloads pressure points. Its design strikes a balance between delivering multiple therapeutic benefits and simplifying the caregiver’s workload.

PressureGuard APM2

Another key offering is the SPAN PressureGuard® Easy Air® Mattress, is a cutting-edge solution designed to deliver superior pressure management and comfort. Proven to outperform leading low-air-loss systems, it effectively reduces skin maceration, ensuring exceptional patient care. With its innovative combination of air and foam technologies, the EasyAir Mattress prevents patient “sink-in” and maintains a stable, supportive surface for unmatched comfort. Additionally, it is energy-efficient, requiring less than 15 watts of power while operating quietly and staying cooler than traditional systems. This advanced design makes the PressureGuard EasyAir Mattress a reliable and cost-effective choice for both patients and caregivers.

SPAN PressureGuard EasyAir Mattress

For high-risk patients, the Geo-Mattress® UltraMax provides exceptional pressure redistribution alongside advanced microclimate management to combat moisture and heat buildup, ensuring superior comfort and prevention. These top-tier solutions from SPH Medical exemplify innovation and dedication to improving patient outcomes.

The UltraMax is the gold standard of pressure redistributing mattresses for hospitals

The Impact of Pressure Injuries and Pressure Ulcer Prevention

Pressure injuries, also known as pressure ulcers or bedsores, affect millions of patients annually. According to the Wound, Ostomy, and Continence Nurses Society (WOCN), effective prevention relies on risk assessment, consistent monitoring, and utilizing appropriate support surfaces and equipment. These injuries not only cause pain and suffering for patients but also represent a significant financial burden to the healthcare system, with billions of dollars spent annually on treatment and management.

Innovative Support Surface Technology

SPH Medical’s advanced support surfaces are designed with the goal of reducing the risk of pressure injuries. Our surfaces incorporate key features such as pressure redistribution and moisture management, targeting both intrinsic and extrinsic risk factors for pressure ulcer development. Research backed by the WOCN emphasizes the importance of pressure redistribution devices, highlighting their efficacy in protecting at-risk patients.

Comprehensive Care Solutions

Our SPH Medical solutions encompass not only innovative products but also thorough education and training for healthcare staff. Proper utilization of support surfaces, combined with caregiver expertise, is crucial to patient safety. Studies referenced by the WOCN detail how a multi-faceted approach, involving staff education and pressure ulcer prevention, significantly lowers the incidence of facility-acquired pressure injuries.

Partnering for Improved Outcomes

When healthcare providers collaborate with SPH Medical, they gain access to products and strategies aligned with best practices established by leading professional organizations like the WOCN. This partnership equips caregivers with the knowledge and tools necessary to promote healing, enhance patient comfort, and prevent complications.

Clinical Evidence Supporting SPH Medical Surfaces

The efficacy of SPH Medical support surfaces is grounded in robust clinical evidence. A study published in Advances in Skin & Wound Care found that hospitals implementing advanced pressure redistribution mattresses saw a 30% reduction in pressure ulcers among high-risk patients compared to standard care. Further, research by the Agency for Healthcare Research and Quality (AHRQ) emphasizes the role of high-specification foam and air surfaces in reducing the likelihood of pressure injury.

Pressure Ulcer Prevention Recommendations for Healthcare Facilities

To maximize the benefits of SPH Medical’s support surfaces, healthcare facilities should consider the following steps:

  • Assess Risk Regularly: Identify patients most vulnerable to pressure ulcers using standardized assessment tools such as the Braden Scale.
  • Integrate Advanced Surfaces: Upgrade to SPH Medical mattresses and related products in high-risk areas such as ICUs and long-term care settings.
  • Invest in Staff Training: Ensure that caregivers are trained in the proper utilization of these devices, fostering compliance with best practices.
  • Ultimately, adopting SPH Medical’s solutions demonstrates a proactive approach to pressure injury prevention aligned with the highest standards of care.

SPH Medical is ready to support healthcare facilities in achieving their patient care goals. To learn more about how our innovative support surfaces can transform your approach to pressure ulcer prevention, contact SPH Medical today at or visit our website for inquiries and orders.

Patient wellbeing is at the heart of SPH Medical’s mission. By integrating evidence-based design and technology, we provide caregivers with the tools to exceed patient care expectations. Discover why SPH Medical is a trusted leader in safe, effective, and cutting-edge patient handling solutions. Together, we can create a future free from the burden of preventable pressure injuries.

CategoriesPatient Handling

The Ultimate Solution to Pressure Ulcer Prevention: SPH Medical’s Hospital Replacement Mattresses

In the healthcare sector, pressure ulcer prevention is not just a priority, it’s a mandate. These conditions not only compromise patient health but also contribute significantly to healthcare costs. Enter SPH Medical, a name synonymous with innovation and excellence in patient care solutions. Among its standout offerings are the Geo-Mattress UltraMax and the PressureGuard Custom Care Convertible advanced hospital replacement mattresses designed to set new benchmarks in pressure ulcer prevention and microclimate management.Custom Care Convertible by SPANamerica and SPH Medical

The Critical Importance of Pressure Ulcer Prevention

Understanding Pressure Ulcers; Pressure ulcers, also known as bedsores, are injuries to skin and underlying tissue resulting from prolonged pressure on the skin. They pose serious health risks and can lead to significant discomfort, infections, and prolonged hospital stays.

The Need for Superior Solutions

Traditional mattresses often fall short in providing the necessary support to prevent these conditions. This gap underscores the urgent need for cutting-edge technology solutions that SPH Medical delivers with precision and reliability.

Geo-Mattress UltraMax

The Geo-Mattress UltraMax stands out for its exceptional design and functionality. Its zoned top layer and advanced foam technology ensure superior pressure redistribution and microclimate management, making it a formidable tool for pressure ulcer prevention.

Pressure Ulcer Prevention and the PressureGuard Custom Care Convertible

Adaptability is at the heart of the PressureGuard Custom Care Convertible. This mattress offers customizable air therapy system, catering to the dynamic needs of patients and ensuring optimal support across different care scenarios.

Additional Offerings

SPH Medical’s portfolio extends beyond these models, each designed with the brand’s hallmark commitment to innovation, patient safety, and comfort. This comprehensive approach positions SPH Medical as a leader in healthcare solutions.SPANamerica and SPH Medical bring you the UltraMax for stretchers

Unmatched Benefits for Pressure Ulcer Prevention

Enhanced Pressure Redistribution; SPH Medical’s mattresses are engineered to evenly distribute weight, significantly reducing pressure points and the risk of pressure ulcer formation.

Superior Microclimate Control

Through innovative design, these mattresses manage skin temperature and moisture, key factors in maintaining skin integrity and preventing ulcers.

Durability and Comfort

Beyond their clinical benefits, these mattresses offer durable construction and features focused on patient comfort, enhancing the overall patient experience and satisfaction.

Evidence of Effectiveness

Clinical Success Stories: Testimonials from healthcare professionals and case studies highlight the transformative impact of SPH Medical’s mattresses on patient outcomes, showcasing significant reductions in pressure ulcer incidence.

Supported by Statistics

Data-driven evidence reinforces the effectiveness of these advanced mattress systems, with statistics demonstrating their role in decreasing the prevalence of pressure ulcers in healthcare settings.

Why SPH Medical Stands Apart in Pressure Ulcer Prevention

Innovation and Expertise: SPH Medical’s dedication to research and development has resulted in superior product offerings that address the complex needs of patient care.

Commitment to Quality and Safety

Each mattress undergoes rigorous testing and certification processes, ensuring they meet the highest standards of quality and safety is a testament to SPH Medical’s unwavering commitment to excellence.

Healthcare facilities and professionals are urged to prioritize patient health by choosing SPH Medical’s advanced hospital replacement mattresses. This decision is not merely a purchase; it is a commitment to providing unparalleled care and pressure ulcer prevention with the most effective tools available.

SPH Medical’s mattress solutions represent the pinnacle of innovation in pressure ulcer prevention. With unmatched benefits, proven effectiveness, and a steadfast commitment to quality and safety, these mattresses are the ultimate choice for healthcare providers dedicated to delivering superior patient care. In the fight against pressure ulcers, SPH Medical stands as a beacon of hope, offering solutions that promise not just better outcomes, but a new standard in healthcare excellence.

Add to cart